View BT101IW01-V0_2771249.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

inno l u x display corporation bt101iw01 v.0 lcd module specification ( ) preliminary specification ( ) final specification customer checked & approved by approved by checked by prepared by mkt pd pm yuyeh chen date: 2009/05/05 innolux display corporation no.160 kesyue rd., chu-nan site, hsinchu science park, chu-nan 350, miao-li county, taiwan tel: 886-37-586000 fax: 886-37-586060 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.0 innolux copyright all rights reserved, copying forbidden. record of revision version revise date page content 0.0 2009/05/05 all first edition issued www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 1/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. contents: page 1. general specifications 2 2. electrical specifications 2-1 pin assignment 2-2 absolute maximum ratings 2-3 electrical characteristics 3 5 6 3. optical specifications 14 4. reliability test items 17 5. safety 18 6. display quality 18 7. handling precaution 18 8. label definition 19 9. packing form 21 10. mechanical drawings 22 11. system cover design notice 24 appendix 25 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 2/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 1. general specifications no. item specification unit 1 display resolution (pixel) 10 24(h) x 600(v), sd resolution 2 active area 222.72(h) x 125.28(v) mm 3 screen size 10.1 inches diagonal inches 4 pixel pitch 217.5x208.8 um 5 color configuration r, g, b vertical stripe 6 overall dimension 235 (w) x 143(h) x 5.2(d) (max) mm 7 weight 190max. grams 8 surface treatment glare 9 input color signal 6 bit lvds 10 display colors 262k (6 bit) 11 optimum viewing di rection 6 o?clock 12 backlight w-led 13 glass thickness 0.5 mm 13 led life time with module 12,000 (min), t=25 c hrs 14 rohs rohs compliance www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 3/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 2. electrical specifications 2-1 pin assignment a. panel connector connector part no.: i-pex 20455-040e-0 2 e foxconn gs13401-1110p-7f or equivalent user?s connector part no: i-pex 20453-040t-11 or equivalent pin no symbol function remark 1 nc no connection (reserve) 2 v cc power supply (+3.3v) 3 v cc power supply (+3.3v) 4 v edid ddc power +3.3v 5 nc no connection (reserve) 6 clk edid ddc clock 7 data edid ddc data 8 rxin0- - differential data input 9 rxin0+ + differential data input r0~r5,g0 10 gnd ground 11 rxin1- - differential data input 12 rxin1+ + differential data input g1~g5,b0,b1 13 gnd ground 14 rxin2- - differential data input 15 rxin2+ + differential data input b2~b5,de,hsync,vsync 16 gnd ground 17 clk- - differential clock input 18 clk+ + differential clock input 19 gnd ground 20 nc no connection (reserve) 21 nc no connection (reserve) 22 gnd ground 23 nc no connection (reserve) 24 nc no connection (reserve) 25 gnd ground 26 nc no connection (reserve) 27 nc no connection (reserve) 28 gnd ground 29 nc no connection (reserve) 30 nc no connection (reserve) 31 led_gnd led ground 32 led_gnd led ground 33 led_gnd led ground 34 nc no connection (reserve) 35 led_pwm pwm dimming signal input 36 led_en led enable pin (3.3v) 37 nc no connection (reserve) 38 v_led led power supply 7.5v~21v 39 v_led led power supply 7.5v~21v 40 v_led led power supply 7.5v~21v www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 4/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. b. general block diagram t-con 20455-040 dc/dc connector plug in direction pin1 led driver dc/dc vr fpc www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 5/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 2-2. absolute maximum ratings v alues parameter symbol min. max. unit remark power input voltage v cc - 0.3 4.0 v at 25c input signal voltage v in - 0.3 4.0 v at 25c led input voltage v led - 0.3 30 v at 25
operating temperature top 0 50 c note 1 storage temperature t st - 20 60 c note 2 re-screw - 5 times assured torque at side mount - 2 kgf.cm note 1: the relative humidity must not exceed 90% non-condensing at temperatures of 40c or less. at temperatures greater than 40c, the wet bulb temperature must not exceed 39c. note 2: the unit should not be exposed to corrosive chemicals. 0 10 20 30 40 50 60 70 80 90 100 -40 -20 0 20 40 60 80 relative humidity (%rh) operation range storage range temperature (c) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 6/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 2-3. electrical characteristics a. typical operating conditions item symbol min. typ. max. unit remark power input voltage v cc 3 3.3 3.6 v permissive power input ripple v rf - - 0.1 v power input current i cc - 220 400 ma note 1 p logic - 0.75 (0.8) watts note 1 p logic-g - 0.6 (0.7) watts note 2 p total - 2.75 (3.15) watts note 1 power consumption p total-g - 1.65 (1.95) watts note 3 differential input high threshold voltage v lvth - - +100 mv v lvc =1.2v, note 4 differential input low threshold voltage v lvtl -100 - - mv v lvc =1.2v, note 4 common input voltage v lvc 0.1 1.2 1.4 v note 4 lvds interface terminating resistor r t 90 100 110 ohm initial inrush current i inrush - - 1 a stable rush current i st-rush - - 0.0025 a 2 sec note 5 led initial inrush current i led-inrush - - 2.0 a led stable rush current i led-st-inrush - - 0.0075 a 2 sec note 6 note 1: the specified input current and power consumption are under the v cc =3.3 v, 25 c, f v =60hz (frame frequency) condition whereas black pattern is displayed. note 2: the logic power consumption @100 nits with full white pattern under the v cc =3.3 v, 25 c, f v =60hz (frame frequency) condition note 3: the logic power consumption & bl power consumption @100 nits with full white pattern under the v cc =3.3 v, 25 c, f v =60hz (frame frequency) condition www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 7/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. note 4: lvds waveform diagram note 5: test condition (1) pattern: black pattern (2) v cc = 3.3 v, v cc rising time = 470 ? s 10% (3) test circuit 90% 10% ton=470s10% v cc 3.3 v 12v v cc ( lcd input) control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf rxin+/clk+ rxin-/clk- v lvc v lvtl v lvth gnd www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 8/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. note 6: test condition (1) pattern: led duty 100 (2) v_led = 12.0v, v_led rising time = 470 ? s 10% (3) test circuit 90% 10% ton=470s10% v _ led 12 v 21v v_led control signal (high to low) m2 2sk1399 m1 2sk1059 r2 1k c2 10000pf c3 1uf r3 47k r1 47k fuse c1 1uf www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 9/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. b. power sequence power sequence timing table value parameter min. typ. max. units t 1 0.5 - 10 ms t 2 0 - 50 ms t 3 200 - - ms t 4 200 - - ms t 5 0 - 50 ms t 6 0 - 10 ms t 7 400 - - ms power supply for lcd, v cc interface data signal, v i (lvds signal of transmitter) backlight on/off t 1 t 2 t 3 t 4 t 5 t 6 t 7 0v 0v valid data lamp on off off 90% 10% 10% 90% www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 10/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. c. display color vs. input data signals signal name description remark r5 red data 5 (msb) r4 red data 4 r3 red data 3 r2 red data 2 r1 red data 1 r0 red data 0 (lsb) red-pixel data red-pixel data. each red pixel's brightness data consists of these 6 bits pixel data. g5 green data 5 (msb) g4 green data 4 g3 green data 3 g2 green data 2 g1 green data 1 g0 green data 0 (lsb) green-pixel data green-pixel data. each green pixel's brightness data consists of these 6 bits pixel data. b5 blue data 5 (msb) b4 blue data 4 b3 blue data 3 b2 blue data 2 b1 blue data 1 b0 blue data 0 (lsb) blue-pixel data blue-pixel data. each blue pixel's brightness data consists of these 6 bits pixel data. signal for 1 dclk cycle (t clk ) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 11/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. d. input signal timing timing table description symbol min typ max unit frame rate -- --- 60 --- hz clock freq. 1/t clk (40) 46.4 (55) mhz line cycle time t h (1054) 1212 (1400) t clk line width-active t hd --- 1024 --- t clk frame cycle time t v (610) 638 (654) t h v width-active t vd --- 600 --- t h e. display position d(1, 1) d(2, 1) ?? d(673, 1) ?? d(1023, 1) d(1024, 1) d(1, 2) d(2, 2) ?? d(673, 2) ?? d(1023, 2) d(1024, 2) . . . ?? . . . ?? . . . . . . d(1, 384) d(2, 300) ?? d(673, 384) ?? d(1023, 300) d(1024, 300) . . . ?? . . . ?? . . . . . . d(1, 767) d(2, 599) ?? d(673, 599) ?? d(1023, 599) d(1024, 599) d(1, 768) d(2, 600) ?? d(673, 600) ?? d(1023, 600) d(1024, 600) t v t vd t h t hd t clk de de dclk www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 12/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. f. backlight driving conditions parameter symbol min. typ. max. unit remark led forward voltage v f 3 3.2 3.4 v rms t = 25 c led forward current i f 20 ma rms t = 25 c p led 2.1 (2.3) w t = 25 c led power consumption p led-g 1.05 (1.25) w note 1 output pwm frequency f pwm 200 1000 2000 c duty ratio - 20 100 % pwm duty cycle linearity led life time - 15,000 hr t = 25 c , note 2 note 1: the bl power consumption @100 nits with full white pattern under the v cc =3.3 v, 25 c, f v =60hz (frame frequency) condition note 2: led life time definition is brightness decrease to 50% of initial or abnormal lighting. g. module function block lvds data bus mini-lvds & control bus power i2c bus gate driver source driver timing controller step-up regulator & reference voltage generator edid eeprom tft-lcd lvds connector led light-bar led driver www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 13/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. h. led circuit block led driving circuit 3 parallels & 9 series fb2 fb3 fb1 led_p www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 14/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 3. optical specifications specification item symbol condition min. typ. max. unit remark response time tr+tf = 0 8 16 ms note 3 contrast ratio cr = 0 400 500 note 2,4 top 15 bottom 30 left 40 right cr 10 40 deg note 2,4,6 top 5 bottom 10 left 20 viewing angle right cr 100 20 deg note 2,4,6 brightness (5 points average) y l 170 200 nit note 2,5 w x 0.313 w y 0.329 r x 0.575 r y 0.348 g x 0.336 g y 0.574 b x 0.154 color chromaticity (cie) b y = 0 -0.03 0.105 +0.03 note 2 color gamut ntsc cie1931 40 45 % - w(5) 1.25 white uniformity w(13) (1.55) note 2,7 cross talk ct 2% note 8 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 15/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. note 1: to be measured in dark room. note 2: to be measured with a viewing cone of 2by topcon luminance meter bm-5a. note 3: definition of response time: the output signals of bm-7 are measured when the input signals are changed from ?black? to ?white? (falling time) and from ?w hite? to ?black? (rising time), re spectively. the response time interval is between 10% and 90% of am plitudes. refer to figure as below. note 4: definition of contrast ratio: contrast ratio is calculated with the following formula: note 5: driving current for led should be 20 ma. luminance are measured at the following thirteen points (1~13): y l = (y5+y10+y11+y12+y13) / 5 note 6: definition of viewing angle s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% contrast ratio ( a v g of 5 p ts ) = l white (avg of 5pts.) l black (avg of 5pts.) www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 16/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. note 7: definition white uniformity: luminance is measured at the following thirteen points (1~13): 13 point measuring locations refer to the point 1,~13. 5 point measuring loca tions refer to the point 5,10~13. l and w are active area dimensions. active area center refer to attached drawing note 8: unit: percentage of dimension of display area l l a -l a ? l / l a x 100%= 2% max., l a and l a ? are brightness at location a and a ? l l b -l b? l / l b x 100%= 2% max., l b? and l b? are brightness at location b and b? ? w(13) = maximum brightness o f thirteen points minimum brightness of thirteen points ? w(5) = maximum brightness o f f ive points minimum brightness of five points 0 gray level 1/2 1/2 1/6 1/6 a b 1/2 1/2 1/6 1/6 2/3 1/3 1/3 2/3 a? b? 32 gray level 32 gray level www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 17/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 4. reliability test items test item test condition judgment remark high temperature storage 60c, 240 hours note 1 note 2 low temperature storage -20c, 240 hours note 1 note 2 high temperature & high humidity operation 40c, 90% rh, 240 hours (no condensation) note 1 note 2 high temperature operation 50c, 240 hours note 1 note 2 low temperature operation 0c, 240 hours note 1 note 2 thermal shock (non-operation) -25c / 30 mins ~ 65c / 30 mins 100 cycles note 1 note 2 electrostatic discharge (esd) 150 pf, 330 ? , contact: 8kv, air: 15kv note 1 vibration (non-operation) 1.5g, 10 to 500 hz random ; 0.5hr in each perpendicular axes ( x, y, z ). note 1 note 2 mechanical shock (non-operation) 220g/2ms, half sine wave, x, y, z one time for each direction note 1 note 2 note 1: pass: normal display image with no obvious non-uniformity and no line defect. fail: no display image, obvious non-uniformity, or line defects. partial transformation of the module parts should be ignored. note 2: evaluation should be tested after storage at room temperature more than one hour. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 18/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 5. safety 5-1. sharp edge requirements there will be no sharp edges or corners on the display assembly that could cause injury. 5-2. materials a. toxicity there will be no carcinogenic materials used anywhere in the display module. if toxic materials are used, they will be reviewed and approved by the responsible innolux toxicologist. b. flammability all components including electrical components t hat do not meet the flammability grade ul94-v0 in the module will complete the flammability rati ng exception approval process. the printed circuit board will be made from material rated 94-v0 or better. the actual ul flammability rating will be printed on the printed circuit board. c. capacitors if any polarized capacitors are used in the disp lay assembly, provisions will be made to keep them from being inserted backwards. 6. display quality the display quality of the color tft-lcd module should be in compliance with the innolux incoming inspection standard. 7. handling precaution (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s syst em can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or contacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the performance of module. please store lcd module within the specified storage conditions. www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 19/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 8. label definition 8-1. module label www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 20/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 8-2. carton label www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 21/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 9. packing form www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 22/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 10. mechanical drawings 10-1 front side www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 23/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 10-2 rear side www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 24/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 11. system cover design notice 1. interference examination (tcon / vr vs cable or wire) definition j a) cable or wire overlap with tcon e vr is forbidden for preventing from abnormal display after backpack test, hinge test, twist test or pogo test. b) cable or wire bypass tcon e vr is recommended. 2. system inner surface examination definition j a) sponge tape or poron stick on pcba or frame is forbidden for preventing from abnormal display after backpack test, hinge test, twist test or pogo test. ng o k o k s p on g e ta p e o r p oron: ng ng www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 25/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. appendix: edid code byte value value (hex) field name and comments (hex) (binary) 0 header 00 00000000 1 header ff 11111111 2 header ff 11111111 3 header ff 11111111 4 header ff 11111111 5 header ff 11111111 6 header ff 11111111 header 7 header 00 00000000 8 eisa manufacture code = 3 character id 25 00100101 9 eisa manufacture code (compressed ascii) cc 11001100 0a panel supplier reserved ? product code 03 00000011 0b panel supplier reserved ? product code 00 00000000 0c lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0d lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0e lcd module serial no - preferred but optional (?0? if not used) 00 00000000 0f lcd module serial no - preferred but optional (?0? if not used) 00 00000000 10 week of manufacture-->-- 00 00000000 11 year of manufacture ? 1990 (ex. 2005-1990=15) -->2009 13 00010011 12 edid structure version # = 1 01 00000001 vendor / product edid version 13 edid revision # = 3 03 00000011 14 video i/p definition = digital i/p (80h) 80 10000000 15 max h image size = (22 cm) 16 00010110 16 max v image size = (12 cm) 0c 00001100 17 display gamma = (gamma 100)-100 78 01111000 display parameters 18 feature support ( no dpms, active off, rgb, timing blk 1) 0a 00001010 19 red/green low bit (rxry/gxgy) 40 01000000 1a blue/white low bit (bxby/wxwy) 85 10000101 1b red x rx=0.575 93 10010011 1c red y ry=0.348 59 01011001 1d green x gx=0.336 56 01010110 1e green y gy=0.574 93 10010011 1f blue x bx=0.154 27 00100111 20 blue y by=0.105 1b 00011011 21 white x wx=0.313 50 01010000 panel color coordinates 22 white y wy=0.329 54 01010100 23 established timings 1 (00h if not used) 00 00000000 established timings 24 established timings 2 (00h if not used) 00 00000000 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 26/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 25 manufacturer?s timings (00h if not used) 00 00000000 26 standard timing id1 (01h if not used) 01 00000001 27 standard timing id1 (01h if not used) 01 00000001 28 standard timing id2 (01h if not used) 01 00000001 29 standard timing id2 (01h if not used) 01 00000001 2a standard timing id3 (01h if not used) 01 00000001 2b standard timing id3 (01h if not used) 01 00000001 2c standard timing id4 (01h if not used) 01 00000001 2d standard timing id4 (01h if not used) 01 00000001 2e standard timing id5 (01h if not used) 01 00000001 2f standard timing id5 (01h if not used) 01 00000001 30 standard timing id6 (01h if not used) 01 00000001 31 standard timing id6 (01h if not used) 01 00000001 32 standard timing id7 (01h if not used) 01 00000001 33 standard timing id7 (01h if not used) 01 00000001 34 standard timing id8 (01h if not used) 01 00000001 standard timing id 35 standard timing id8 (01h if not used) 01 00000001 36 pixel clock/10,000 (pixel clock=46.4mhz) (lsb) 20 00100000 37 pixel clock/10,000 (pixel clock=46.4mhz) (msb) 12 00010010 38 horizontal active = 1024 pixels (lower 8 bits) 00 00000000 39 horizontal blanking (thbp) = 188 pixels (lower 8 bits) bc 10111100 3a horizontal active/horizontal blanking (thbp) (upper4:4 bits) 40 01000000 3b vertical active = 600 lines 58 01011000 3c vertical blanking (tvbp) = 38 lines 26 00100110 3d vertical active : vertical blanking (tvbp) (upper4:4 bits) 20 00100000 3e horizontal sync, offset (thfp) = 48 pixels 30 00110000 3f horizontal sync, pulse width = 32 pixels 20 00100000 40 vertical sync, offset (tvfp) = xx lines sync width = xx lines 36 00110110 41 horizontal vertical sync offset/width upper 2 bits 00 00000000 42 horizontal image size =222 mm de 11011110 43 vertical image size = 125 mm 7d 01111101 44 horizontal image size / vertical image size 0 00000000 45 horizontal border = 0 (zero for notebook lcd) 00 00000000 46 vertical border = 0 (zero for notebook lcd) 00 00000000 timing descripter #1 47 signal (non-intr, norm, no stero, sep sync, neq pol) 18 00011000 48 detailed timing/monitor 00 00000000 49 descriptor #2 00 00000000 4a 00 00000000 4b 00 00000000 4c 00 00000000 timing descripter #2 4d 00 00000000 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 27/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 4e 00 00000000 4f 00 00000000 50 00 00000000 51 00 00000000 52 00 00000000 53 00 00000000 54 00 00000000 55 00 00000000 56 00 00000000 57 00 00000000 58 00 00000000 59 00 00000000 5a detailed timing/monitor 00 00000000 5b descriptor #3 00 00000000 5c flag 00 00000000 5d dummy descriptor fe 11111110 5e flag 00 00000000 5f p/n 1 st character "i" 49 01001001 60 p/n 2 nd character "n" 4e 01001110 61 p/n 3 rd character "l" 4c 01001100 62 20 00100000 63 20 00100000 64 20 00100000 65 20 00100000 66 20 00100000 67 20 00100000 68 20 00100000 69 20 00100000 6a 20 00100000 timing descripter #3 dell specific information 6b 20 00100000 6c detailed timing/monitor 00 00000000 6d descriptor #4 00 00000000 6e flag 00 00000000 6f data type tag: 00 00000000 70 flag 00 00000000 71 manufacture p/n "b" 42 01000010 72 manufacture p/n "t" 54 01010100 73 manufacture p/n "1" 31 00110001 74 manufacture p/n "0" 30 00110000 75 manufacture p/n "1" 31 00110001 76 manufacture p/n "i" 49 01001001 timing descripter #4 77 manufacture p/n "w" 57 01010111 www.datasheet.co.kr datasheet pdf - http://www..net/
spec no. bt101iw01 v.0 page 28/ 28 all rights strictly reserved. any portion of this document shall not be reproduced, copied, or transformed to any other forms without permission from innolux display corporation. 78 manufacture p/n "0" 30 00110000 79 manufacture p/n "1" 31 00110001 7a manufacture p/n "v" 56 01010110 7b manufacture p/n "0" 30 00110000 7c 20 00100000 7d 20 00100000 7e extension flag 00 00000000 checksum 7f checksum 72 01110010 www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of BT101IW01-V0

	To Download BT101IW01-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .